TopsT-Shirt (Crew)

T-shirt tech pack

A crew-neck T-shirt in single jersey: the flat the Studio draws, the points a factory measures, a typical bill of materials and a page of the pack the Studio exports.

Start a T-shirt in the Studio
Technical flat of the T-shirt, front and back, with the points of measure BLN-60, CHE-01, SHO-03 drawn on it

A page of the pack

Page 7 of 15: how to measure, front and back flats, with 11 of 13 points drawn on the flat.

Page 7 of the T-shirt tech pack, How to measure: the front and back flats with 11 of its 13 points of measure drawn as coded dimension lines, beside a list of every point and how each one is taken
An example page from a Texhub tech pack: How to measure, page 7 of 15 of the T-shirt pack.

What the pack holds

  1. 01T-shirt
  2. 02Specification summary
  3. 03Flat: front
  4. 04Flat: back
  5. 05Flats: sides
  6. 06Flat: inside
  7. 07How to measure
  8. 08Points of measure
  9. 09Bill of materials
  10. 10Trims and notions
  11. 11Collar construction
  12. 12Labels and packaging
  13. 13Placement schedule
  14. 14What the factory must confirmpages 14 to 15

Points of measure

CodePoint of measureinTol. ±
BLN-60Body length from HPS to hem27 1/21/2
CHE-01Chest 1" below armhole21 1/41/2
SHO-03Across shoulder18 1/21/2
SLV-19Sleeve length7 7/83/8
SLV-21Sleeve opening6 7/83/8
SL33-point sleeve length17 3/81/2
AHSArmhole straight8 1/23/8
BCPMuscle width7 7/83/8
SCHSleeve cap height4 1/81/4
CH5Chest 5 in below armhole21 1/41/2
SWPBottom sweep21 1/41/2
FNDFront neck drop31/4
BNDBack neck drop7/81/8

Bill of materials

CodeComponentMaterialColour
ABodyCombed single jersey, 180 gsm100% cotton11-0601 TCX Bright White
BNeck rib1x1 rib, 220 gsm95% cotton, 5% elastane11-0601 TCX Bright White

Trims

  • 01Polyester core-spun sewing threadthread · Tex 27 · All seams
  • 02Back neck tape, cotton twillother · 10 mm · Back neck seam, shoulder to shoulder

Notes for the factory

  • Neckband: state the finished width and the rib-to-neckline ratio, or the neck will stand off or ripple.
  • Back neck: say whether the shoulder-to-shoulder seam is taped, and with what.
  • Hems: name the stitch (a twin-needle coverstitch is usual) and the hem depth at the body and the sleeve.
  • Single jersey twists after washing: ask for the side seam twist to be checked on the wash test.

Guides for this garment

  1. 01Making a tech pack with AI
  2. 02Technical flats from photos and sketches
  3. 03Points of measure
  4. 04The bill of materials
  5. 05Grading and size charts
  6. 06What a tech pack is

Make this garment yours

Start from it in the Studio, or draw your own version from photos.

Open in the StudioAll examples