TopsPullover Hoodie

Hoodie tech pack

A pullover hoodie in brushed-back fleece with a kangaroo pocket and rib cuffs and waistband: the flat, the points a factory measures, a typical bill of materials and a page of the pack.

Start a pullover hoodie in the Studio
Technical flat of the hoodie, front and back, with the points of measure BLN-60, CHE-01, SHO-03 drawn on it

A page of the pack

Page 7 of 18: how to measure, front and back flats, with 11 of 20 points drawn on the flat.

Page 7 of the hoodie tech pack, How to measure: the front and back flats with 11 of its 20 points of measure drawn as coded dimension lines, beside a list of every point and how each one is taken
An example page from a Texhub tech pack: How to measure, page 7 of 18 of the hoodie pack.

What the pack holds

  1. 01Hoodie
  2. 02Specification summary
  3. 03Flat: front
  4. 04Flat: back
  5. 05Flats: sides
  6. 06Flat: inside
  7. 07How to measurepages 7 to 8
  8. 08Points of measurepages 9 to 10
  9. 09Bill of materials
  10. 10Trims and notions
  11. 11Hood construction
  12. 12Labels and packaging
  13. 13Placement schedule
  14. 14What the factory must confirmpages 16 to 18

Points of measure

CodePoint of measureinTol. ±
BLN-60Body length from HPS to hem281/2
CHE-01Chest 1" below armhole221/2
SHO-03Across shoulder19 1/41/2
SLV-19Sleeve length24 3/41/2
SLV-21Sleeve opening (cuff)3 7/81/4
SLV-47Cuff height2 3/41/4
SWE-18Waistband rib height2 3/41/4
SWE-19Rib spacing / gauge5/81/8
HD-33Hood height153/8
HD-34Hood width10 5/83/8
POC-01Kangaroo pocket width153/8
POC-02Kangaroo pocket height at CF8 3/83/8
SL33-point sleeve length34 3/41/2
AHSArmhole straight9 5/83/8
BCPMuscle width8 3/83/8
SCHSleeve cap height9 1/83/8
CH5Chest 5 in below armhole221/2
SWPBottom sweep221/2
FNDFront neck drop3 1/21/4
BNDBack neck drop1 1/41/8

Bill of materials

CodeComponentMaterialColour
ABodyBrushed-back fleece, 340 gsm80% cotton, 20% polyester18-0601 TCX Charcoal Gray
BRib2x2 rib, 320 gsm95% cotton, 5% elastane18-0601 TCX Charcoal Gray

Trims

  • 01Round cotton drawcord, metal tipsdrawstring · 8 mm · Hood×1
  • 02Metal eyeletsother · 10 mm · Hood front, either side of centre front×2
  • 03Polyester core-spun sewing threadthread · Tex 27 · All seams

Notes for the factory

  • Hood: say how many panels it has and whether it is single or double layer; measure its height at centre front.
  • Drawcord: give the finished length out of each eyelet, the tip, and whether the cord is stitched at centre back.
  • Rib: state the cuff and waistband heights and ask for stretch recovery to be checked on the first sample.
  • Kangaroo pocket: bartack the pocket mouths; they take the most strain on the garment.

Guides for this garment

  1. 01Making a tech pack with AI
  2. 02Technical flats from photos and sketches
  3. 03Points of measure
  4. 04The bill of materials
  5. 05Grading and size charts
  6. 06What a tech pack is

Make this garment yours

Start from it in the Studio, or draw your own version from photos.

Open in the StudioAll examples